Especialista em risco e confiabilidade com mais de 35 anos de experiência no Brasil e no exterior, tendo sido pioneiro na aplicação de análise e gerenciamento de risco e confiabilidade no Brasil. PhD em Engenharia Nuclear pela U.C. Berkeley, em 1979. Foi por 13 anos professor da COPPE/UFRJ. Fundou a PRINCIPIA Engenharia, a qual foi adqui¬rida em 2000 pela DNV GL. É Vice-Presidente da DNV GL, e atualmente Gerente do Centro de P&D da DNV GL no Rio de Janeiro. É autor de cerca de 130 trabalhos técnicos publicados em revistas e conferências. É o atual Presidente da ABRISCO.

Cliff Johnson joined Pipeline Research Council International (PRCI) in September 2010 as President. He has overseen the creation of the new PRCI Technology Development Center (TDC) in Houston, Texas, which opened in 2015. The TDC will be a cornerstone for PRCI research and deployment for key solutions for the pipeline industry. As President, he has been able to grow PRCI membership by 20%. Today PRCI represents over 60% of the world’s transmission pipeline mileage.

Prior to joining to PRCI, Mr. Johnson spent 13 years at NACE International, where he has held a variety of positions during his career. His most recent position was as NACE’s Director of Public Affairs where he led NACE’s legislative initiatives.

Mr. Johnson earned his Master of Public Affairs from the Lyndon Baines Johnson School of Public Affairs at the University of Texas at Austin, and a Bachelor of Arts in Political Science from Austin College in Sherman, Texas. He has obtained his Certified Association Executive (CAE) designation and is active in the America Society of Association Executives.

He currently lives with his wife, Courtney, and 5 children (Emma, Oleg, Vivian, Lena, and Hana) in Centreville, Va.

ACADEMIC EDUCATION
• Graduation in Civil Engineering - PUC /RJ – 1975;
• Post - Graduation: Safety and Occupational Engineering Specialist (UFMS- 1990);
• Post - Graduation: Specialist at Worker Health - Dr. Jorge David Nasser Public Health School and Osvaldo Cruz Foundation (FIOCRUZ- 1995);
• Post-graduation: Specialist at Natural Gas Technology - University for Regional Development of Pantanal (UNIDERP- 2004);
PROFESSIONAL EXPERIENCES
• Work Safety Engineer, Safety and Occupational Health Director – Secretary of Labor and Justice of Mato Grosso do Sul State - 1991-2002;
• Safety and Environment Manager- Gas Company of Mato Grosso do Sul (MSGÁS)- 2003-2005, Campo Grande, MS;
• Safety Analyst of MSGÁS - 2002 (current), developing Security Environment and Health (SHE) activities related to the implementation of Company's SHE Policy and to the natural gas distribution process in Campo Grande, Três Lagoas and Corumbá (cities in Mato Grosso do Sul-MS).

João Paulo Klausing Gevásio, 36 anos. Pós-graduação Latu Sensu em Engenharia de Dutos pela PUC-RJ (2008); graduação em Engenharia Industrial Elétrica pelo CEFET-MG (2004). Certificação NACE CP-3 (Cathodic Protection Technologist). Consultor em Proteção Catódica na PETROBRAS, onde trabalha desde 2006 no setor de Engenharia de Dutos Terrestres. Coordenador de normalização técnica na ABNT. Professor na Universidade Petrobras e entidades externas.

Foi diretor de Abastecimento de fevereiro de 2015 a março de 2016.
Ingressou na Petrobras em 1983 e, entre as funções que já desempenhou na companhia estão a de gerente de Comercialização da Refinaria Isaac Sabbá (Reman), de 1996 a 1999. Nesse mesmo ano assumiu a Gerência Executiva de Operações da Petrobras Distribuidora, permanecendo até 2002. Em seguida, foi nomeado gerente executivo Industrial da Fábrica de Lubrificantes da Petrobras Distribuidora, onde ficou até 2003.
Ocupou mais duas funções na Petrobras Distribuidora: gerente da Regional Consumidor Leste, de 2003 a 2005, e gerente de Marketing de Indústria e Térmica, de 2005 a 2007.
Ainda em 2007, retornou à função de gerente executivo de Operações da subsidiária, permanecendo até 2014, quando, com a grande experiência adquirida em gestão industrial, marketing e operações, retornou ao Abastecimento, assumindo a Gerência Executiva de Logística.
Formado em Engenharia Química pela Universidade do Estado do Rio de Janeiro (Uerj) e em Engenharia de Processamento de Petróleo pelo Centro de Especialização em Engenharia de Produção (Cenpro), da Universidade Estadual Paulista (Unesp), com especialização em Tecnologia de Produção de Álcool pela Coppe/UFRJ e MBA em Administração e em Marketing.

Marcos Rodrigues is a Civil Engineer graduated in 1996 in UFJF (Federal University of Juiz de Fora - MG). He has completed the MSc degree in 1998 and the D.Sc. degree in 2004 in COPPE - UFRJ (Federal University of Rio de Janeiro). Marcos has 20 years of experience in the pipeline industry. He worked for 2 years in Technip with flexible risers design and qualification of new structures. He also worked for 7 years in cooperation projects between CENPES (Research Centre of Petrobras) and COPPE – UFRJ. Marcos Rodrigues has joined DNV in January 2006. Nowadays he is Principal Engineer.

Engenheiro Mecânico formado pela UFRJ em 1998, Eduardo Merçon trabalha no sistema Petrobras desde 2001, atuando sempre na área de dutos e terminais da TRANSPETRO, onde desde 2005 exerce cargos gerenciais nos segmentos de Óleo e Gás. Foi Gerente do Centro de Controle Operacional de Gasodutos de 2013 a 2015 e atualmente exerce o cargo de Gerente de Operações do CNCL, Centro Nacional de Controle e Logística da TRANSPETRO, órgão responsável pela operação de mais de 14.000 km de oleodutos e gasodutos em 17 Estados do país. Especializou-se na primeira turma do curso de Engenharia de Dutos da PUC-Rio, em 1999, e concluiu em 2005 curso de Master in Business of Petroleum - MPB da COPPE/UFRJ.

Empregado de carreira do Sistema Petrobras, Antonio Rubens Silva Silvino ingressou na Petrobras Distribuidora em 1976. Exerceu funções gerenciais em áreas como Marketing, Comercialização e Planejamento até assumir a presidência da Liquigás, em 2006, época em que esta subsidiária era vinculada àquela Distribuidora (a Liquigás passou a ser ligada diretamente à área de Abastecimento da Petrobras em 2012).
Antonio Rubens permaneceu à frente da Liquigás até abril de 2014, quando foi convidado a assumir a Gerência Executiva Corporativa do Abastecimento. Desde junho de 2015, ocupa a presidência da Transpetro.
Formado em Economia pela Faculdade de Ciências Econômicas e Comerciais de Santos (SP) e pós-graduado em Administração de Empresas pela Escola de Administração de Empresas de São Paulo (EAESP/FGV), Antonio Rubens concluiu ainda curso de especialização pelo Massachusetts Institute of Technology (MIT), dos Estados Unidos, e pelo Programa de Gestão Avançada da escola de negócios francesa INSEAD, realizado em parceria com a Fundação Dom Cabral.

Formação acadêmica/titulação:
1981 - 1986 Graduação em Engenharia Mecânica. Universidade Católica de Petrópolis, UCP, Rio de Janeiro - Brasil. Título: Trabalho Final. Orientador: Eng° Osvaldo Guimarães.

Formação Complementar:
2000 - 2001 Curso de Especialização em Engenharia de Gás Natural (Carga horária: 384h). Universidade Potiguar, UNP, Brasil.
1994 - 1994 Especialização em Gerência. (Carga horária: 90h).
Instituto Mauá de Tecnologia, IMT, Brasil.
1987 - 1987 Extensão Universitária em Engenharia de Terminais e Dutos. (Carga horária: 872h). Petróleo Brasileiro - PETROBRAS - Rio de Janeiro - Brasil.

Experiência Profissional:
1987-2006 – Desenvolvimento de atividades de profissionais no Terminal de Dutos da PETROBRAS em São Paulo e Rio de Janeiro.
2000 – até a presente data – Desenvolvimento de atividades de Engenharia , Operação e Manutenção na Companhia de Gás do Estado de Mato Grosso do Sul – MSGÁS, Capital.

Jorge Luiz Kauer, eng. Mecânico pela Universidade Federal do Rio Grande do Sul, com curso de especialização em engenharia de instalações marítimas e MBA executivo pela COPPE e Especialização Lato Sensu em Gerenciamento de Projetos.
Ingressou na Petrobras em 1977 e durante este período ocupou diversas funções técnicas e gerenciais, dentre as quais:
• Gerente de Projetos de Engenharia Básica
• Coordenador do Programa Tecnológico de Dutos
• Gerente de Engenharia da Área Internacional
• Gerente Geral da empresa TRANSIERRA na Bolívia
• Gerente Geral de Engenharia Básica de Projetos de Exploração e Produção
• Gerente das Plantas Piloto do centro de pesquisas da Petrobras
Desde setembro de 2016 exerce a função de Gerente Geral de Pesquisa e Desenvolvimento em Integridade, Sustentabilidade e Otimização, no centro de pesquisas da Petrobras

Caio is a Senior Engineer at Comgas, a natural gas distribution company in Sao Paulo, Brazil. He is leading the research and assessment of corrosion in gas pipeline. He is also responsible for assessing damage to steel pipes for natural gas distribution systems. Caio also take part of National Committees for the development of Brazilian Standards related to gas distribution systems and corrosion. He also works as a Professor at the Faculdade das Américas.
Caio is graduated in Materials Engineering from the University Presbiteriana Mackenzie, with a a Master of Science degree in Materials Science from the University of São Carlos and two pHDs: in Nuclear Energy (Materials) from University of Sao Paulo and physical-chemical from Universit Pierre and Marie Curie (France).

Graduação em Engenharia Mecânica Plena pelo Centro Universitário da FEI (2001), mestrado e doutorado em Engenharia Metalúrgica pela Universidade de São Paulo (2010). Atualmente é Gerente de Engenharia de Produto de Peças Forjadas - Villares Metals (desde de 2010) . Tem experiência na área de Engenharia de Materiais e Metalúrgica e na área da Qualidade.

Civil Engineer from the University of Buenos Aires. Postgraduate in Control Systems in the University of Buenos Aires, Master’s degree in Maintenance Management at Universidad Austral, MBA at the ADEN Business School in Mendoza
He has 34 years of experience in the petroleum industry, the last 17 years he has worked in the Logistics of Hydrocarbons of the Argentine Republic.
He is currently Manager of Pipelines of YPF SA. He is a member of ARPEL's CODyTE, co-author of the ARPEL Manual for Pipelines Integrity Management

Darron Phillips – Mr. Phillips has served various engineering, project, and testing management roles with Oil States Industries, Inc. over the past 25 years. He is currently Senior Project Manager, and managed the flexible joint products deliveries for two pre-Salt rigid riser projects. Mr. Phillips is a graduate of the University of Texas at Austin, and of the University of Dallas, holding degrees in mechanical engineering and business management. Mr. Phillips is a registered Professional Engineer in the State of Texas, U. S.

Environmental Engineering PhD, Industrial Engineering Master with a Mention in Operations and Productivity, Chemical Engineer, Gas Transmission Professional, International Certificate by the Department of Transportation (DOT) as Master Trainer, Master Evaluator and Qualified Operator in Pipeline Transportation System Operation.
Professional experience as Head of Transportation, Control Room Chief, Fractionation Plant and Pipeline supervisor for about 20 years.

Cliff Johnson joined Pipeline Research Council International (PRCI) in September 2010 as President. He has overseen the creation of the new PRCI Technology Development Center (TDC) in Houston, Texas, which opened in 2015. The TDC will be a cornerstone for PRCI research and deployment for key solutions for the pipeline industry. As President, he has been able to grow PRCI membership by 20%. Today PRCI represents over 60% of the world’s transmission pipeline mileage.

Prior to joining to PRCI, Mr. Johnson spent 13 years at NACE International, where he has held a variety of positions during his career. His most recent position was as NACE’s Director of Public Affairs where he led NACE’s legislative initiatives.

Mr. Johnson earned his Master of Public Affairs from the Lyndon Baines Johnson School of Public Affairs at the University of Texas at Austin, and a Bachelor of Arts in Political Science from Austin College in Sherman, Texas. He has obtained his Certified Association Executive (CAE) designation and is active in the America Society of Association Executives.

He currently lives with his wife, Courtney, and 5 children (Emma, Oleg, Vivian, Lena, and Hana) in Centreville, Va.

John Browne (Lord Browne of Madingley) was CEO of BP from 1995–2007, where he built a reputation as a visionary leader, transforming BP into one of the world‘s largest companies. He was president of the Royal Academy of Engineering, is a fellow of the Royal Society, a foreign member of the US Academy of Arts and Sciences, and chairman of the trustees of the Tate Galleries. He holds degrees from Cambridge and Stanford universities, was knighted in 1998, and made a life peer in 2001. He is now the Executive Chairman of L1 Energy, an oil and gas investment company controlled by the Russian billionaire Mikhail Fridman, through Alfa Group.

Mr. Hogan has served in materials development, engineering, and project management roles with Oil States Industries, Inc. over the past 33 years. He is currently responsible for project execution for all Oil States product divisions. Mr. Hogan is a graduate of the Texas A&M University and the University of Texas at Arlington, holding degrees in mechanical engineering, welding metallurgy, and business management. Mr. Hogan is a registered Professional Engineer in the State of Texas, U. S.

• Metallurgical Engineer (Undergraduate) – Federal University of Rio de Janeiro;
• Welding Engineer (Post-Graduate) – SENAI-RJ
• Metallurgical Engineering - Physical Metallurgy and Mechanical Properties (Master Degree, in progress) – Federal University of Rio de Janeiro.


• Specification, quality requirements definition and destructive qualification of forgings;
• Specification, quality requirements definition and qualification of boltings Corrosion and materials selection engineer / cathodic protection design;
• Special alloys (titanium and shape-memory alloys)
• Metallic coatings and surface treatments;
• Failure analysis
• Test methodologies definitions for hydrogen embrittlement evaluation in low alloy steels
• Chemical composition development for low alloy steels forgings.

Marcelo Rennó, natural de Belo Horizonte/Minas Gerais, formado em Engenharia Mecanica pela UFMG em 1976. Pós-graduado em Mecânica dos Fluidos pela UFRJ em 1984, MBA em Marketing e Finanças pela COPPEAD em 1996 e MBA em Políticas Públicas e Governo pela Economia da UFRJ em 2000. Trabalhou no Sistema Petrobras de 1977 a 2013 tendo atuado no planejamento, projeto, construção e implantação de diversos dutos do país, destacando-se o Gasoduto Bolívia-Brasil no qual foi Coordenador do Projeto, aquisição de materiais e tecnologia da construção. Foi Diretor da área de Gas Natural da Transpetro de 2006 a 2013,tendo sido responsáel pela Operação e Manutenção da malha de gasodutos da Petrobras e do Terminal de processamento de gás de Cabiúnas/Macaé. Trabalhou em Lima/Peru na implantação do GSP – Gasoduto Sul Peruano de 2014 a 2016. Atualmente é consultor independente atuando como voluntário no IBP e CTDUT – Centro de Tecnologia de Dutos.

Dr. Guerrero is a mechanical engineer who assists and guides corporations globally with their technology development needs. Dr. Guerrero has worked in research and development (R&D) and business development for several years in diverse companies such as Draper Laboratory in Cambridge, MA; Schlumberger Research (SLB) in Houston, TX and Cambridge, MA; and FIAT-IVECO in Torino Italy. Dr. Guerrero's technical expertise includes analyzing, designing, and developing mechanical systems, including those for harsh and extreme conditions. He has extensive experience with the energy and oil and gas industries and is an owner of over 20 mechanical system patents worldwide. Dr. Guerrero earned his master's and Ph.D. degrees from the University of Texas at Austin and was awarded the Honorary Doctoral degree from Universidad Nacional de Ingeniería in Lima-Peru in 2015. In 2014, he became a member of the Pan-American Academy of Engineering (32 countries). He was the 2015-2016 President of the American Society of Mechanical Engineers (ASME), an organization of almost 140,000 engineers in 150 countries.

Since 2003, Dr. Guerrero has collaborated with MIT professors, graduate students, and WHOI researchers and lectured in engineering at MIT. He developed applications for Draper Laboratory’s technological capabilities and assets in the energy industry, including oil and gas exploration and the nuclear industry. Dr. Guerrero served as a principal research scientist at SLB, where he helped develop robots to convey equipment in horizontal oil and gas wells. He also established numerous research collaborations with professors and students from universities and research centers around the world and led the 2,400-member SLB/Eureka Mechanical Engineering Community in 3 continents and all SLB engineering centers for 5 years.

He is fluent in several languages, and loves skiing and swimming, history, economics, and Renaissance Italian art.

Formado em Engenharia, com pós-graduação em Gestão Empresarial, é empregado de carreira do Sistema Petrobras desde 1984. Já foi auditor e instrutor do Processo de Gestão de Qualidade da Petrobras e desempenhou funções gerenciais nos Terminais Aquaviários da Baía de Guanabara e no Terminal Aquaviário de Angra dos Reis. Na Sede (RJ), foi Gerente Executivo de Oleodutos (02/2005 – 10/2007), Gerente Executivo de Terminais Aquaviários (10/2007 - 07/2010) e Gerente Executivo de Desenvolvimento de Logística para o Pré-sal (07/2010 - 12/2013). Em dezembro de 2013 foi designado para assumir a Diretoria de Dutos e Terminais.
Participou como representante da Petrobras no Comitê de Portos e Terminais (PTC) e no Comitê Executivo (EXCOM), ambos do OCIMF (Oil Companies International Marine Forum). Atuou como presidente e atualmente é o vice-presidente do Comitê de Dutos e Terminais (CoDyTe) da ARPEL (Regional Association of Oil, Gas and Biofuels Sector Companies in Latin America and the Caribbean).

Academic Background
M.Ba., Fundacao Getulio Vargas, Brazil, 2001
Ph.D. Engineering, University of Reading, UK, 1992
Inspection Engineering, Petrobras University, 1977
B.S., Mechanical and Automotive Engineering, Instituto Militar de Engenharia, Brazil, 1976
Employment History
Senior Staff Consultant, Stress Engineering Services Inc., Feb. 2011 – Present
Senior Consultant, Petrobras, 2007 – 2010
Manager of Transportation Technology R&D Program (PROTRAN), Petrobras R&D, 2005-2007
Manager of Materials Technology Section, Petrobras R&D, 1996-2005
Staff Engineer, Petrobras R&D, 1979-1996
Equipment Engineer, Petrobras E&P, 1977- 1979
Specialized Professional Competence
Stress analysis and integrity management of pipelines; fatigue design; stress analysis of structures and pressure vessels; failure analysis; integrity management of floating structures; design criteria, installation and integrity management of mooring systems; mooring systems incorporating fiber ropes; use of fiber ropes for lifting and offshore operations.

Luciana Rocha de Moura Estevão is a Chemical Engineer, graduated from the Federal University of Rio de Janeiro, and holds a Masters and a Doctors degree in Organic Chemistry from the same university. She is a regulation specialist at ANP, the National Agency for Petroleum, Natural Gas and Biofuels, and is currently in the position of deputy superintendent of trade and transportation of petroleum, its derivatives and natural gas.

Mr. Paviglianiti is an Engineering Technical Leader at the National Energy Board (NEB) in Calgary, Canada. Joe has over 35 years of experience in the oil and gas industry. He worked in oil and gas facility construction for 14 years as an NDE technician before obtaining Civil Engineering degree from the University of Calgary. Joe has been with the NEB for over 20 years and his responsibilities include construction and pipe integrity inspections, auditing and reviewing integrity management programs, fitness for service evaluations and engineering assessments and conducting failure investigations. In addition, he provides input into regulatory and standards development and is the past Chairman of the Canadian Standards Association (CSA) Z662 Oil and Gas standard Technical Committee and is the Canadian representative on the ISO TC67/SC2 committee. Joe also participated on the executive of the ASME Pipeline System Division and International Pipeline Technology Institute. In addition to having published papers in technical conferences proceedings and journals, Joe has provided training and presentations on various integrity management related topics, construction techniques, standards development, and regulations in numerous countries.

Technician of Operations - Companhia Pernambucana de Gás - COPERGÁS;

Technician in Automation - Companhia Pernambucana de Saneamento – COMPESA;

Technician in Automation by the Federal Institute of Pernambuco;

Electrical Engineer at the University of Pernambuco;

Senior Consultant at Petrobras Transporte. In the last 16 years he has taken technical and management positions in inspection and integrity assessment of pipelines and static equipment. Since 2016 he is dedicated to integrity management of pipelines susceptible to stress corrosion cracking (SCC). Osório holds a B.S. degree in Materials and Metallurgical Engineering. He also holds a M.Sc. in Advanced Mechanical Engineering from Imperial College London.

Analyst of Engineering Projects of the Gas Company of the State of Mato Grosso do Sul – MSGÁS, Mechanical Engineer graduated at the Federal University of Rio Grande (Furg), specialized in Production Engineering at the University of Passo Fundo (UPF) and Master Student in Materials Science at Institute of Physics of the Federal University of Mato Grosso do Sul (UFMS).

Specialist Engineer at Comgas, a natural gas distribution company in Sao Paulo, Brazil. He is leading the research for the implementation of state-of-the-art technologies on the use of plastic and metal pipes for natural gas distribution systems. He is also responsible for improving internal technical procedures based on requirements from Brazilian and International Standards and world’s best practices. Sergio also leads National Committees for the development of Brazilian Standards related to gas distribution systems. He also works as a Professor at the University Paulista.
Sergio graduated in Production Engineering from the University of Sao Paulo, with a specialization in Natural Gas Engineering from the University of Campinas and a master’s degree in Operations and Logistics Management from the University of Sao Paulo.

Possui graduação em Engenharia Química pela Universidade Federal de Minas Gerais - UFMG (2006); especialização em Engenharia de Processamento de Petróleo pela Universidade Estadual do Rio de Janeiro - UERJ (2008) e em Avaliação e Gerenciamento de Riscos pela Universidade Federal do Rio de Janeiro - UFRJ (2009); mestrado em Tecnologia de Processos Químicos e Bioquímicos pela Universidade Federal do Rio de Janeiro - UFRJ (2013); e pós-graduação em Engenharia de Dutos com ênfase em Análise de Riscos pela Universidade de Newcastle, na Inglaterra (2014). Atualmente cursa Doutorado em Sistemas de Gestão Sustentáveis com foco em Gestão de Riscos em Dutos na Universidade Federal Fluminense (previsão de conclusão em 2020). Atuou na área de Análise de Riscos Industriais de 2008 a 2015 como empregado da Petrobras, dando suporte técnico tanto durante os processos de licenciamento de empreendimentos da companhia quanto na seleção de traçados de dutos e de layout/localização de plantas de processo, com foco em risco ao público externo. Atualmente atua na área de Gestão Integrada de Continuidade de Negócios e de Riscos Operacionais da Petrobras.

B.Sc Chemical Engineering (UFRJ, Brazil - 1978), M.Sc. Petroleum Engineering (Unicamp, Brazil - 1993) and Ph.D. (The University of Texas, USA - 1998). Has more than 35 years of experience in the petroleum upstream industry, with emphasis on production methods, natural & artificial lift systems. Was the Asset Manager of Akpo project in Nigeria and the Managing Director of Petrobras Turkey (2006-2009). He also served as General Manager (GM) in charge of Technology&Innovation and GM of Logistics for the pre-salt at Petrobras Transporte (Transpetro) from 2009 to 2014. In 2014, he took over the position of Development and Production Superintendent at Pré-Sal Petróleo. In November 2016 was appointed as Pré-Sal Petróleo Director for a 3 years term.

Tom Miesner began his midstream career in 1975 as an engineering summer aide. Since that time, he has been a pipeline engineer, operations manager, business developer, executive, expert witness, and consultant. Tom has written two books and numerous papers and articles about oil and gas pipelines. He is currently working on the second edition of his first book, Oil and Gas Pipelines in Nontechnical Language. Since 2008, Tom has taught over 150 pipeline classes to approximately 2,500 people. In 2016, the company Tom founded, Pipeline Knowledge & Development released its Hazardous Liquids Pipeline Control Room class consisting of 8 lessons totaling 9 hours. This class is currently in use by 4 major US liquid pipeline operators. For more about Tom Miesner and his company, please go to pipelineknowledge.com

GRADUAÇÃO:
Engenharia Mecânica – UGF/1981
Advocacia - Faculdades Benett/2000

PÓS-GRADUAÇÃO:
(1) MBP: Master Business in Petroleum (UFRJ-Coppe)
(2) Management – IAG/PUC

EMPRESAS:
(1) Montreal Engenharia S.A. – 1982 – 1985
Cargo: Engenheiro Especialista em Qualidade

(2) Petróleo Brasileiro S.A – PETROBRAS
Cargos:
(a) Gerencia de Inspeção: 1985 – 2015 – 30 anos (13 anos como Gerente)
(b) Gerente de Desenvolvimento da Base de Fornecedores: 2015 até o momento

• Formado em Engenharia Civil pela Universidade Mackenzie em 1989
• Especializou-se em Geotecnia e Infraestrutura pela USP
• Projetista e Consultor de Geotecnia de 1990 a 2002
• Engenheiro Geotécnico de Faixa de Dutos pela TRANSPETRO 2003 a 2007 e pela TBG entre 2008 e 2009
• Coordenador de Faixa de Dutos pela TBG desde 2009

Michael Rapp is head of the global business line ‘Proficient Pipeline Diagnostics’, being responsible for the ROSEN Group inline inspection (ILI) business in the following areas:
Geometry & Mapping, Metal Loss, Leak Detection, Visual Inspection and Material Properties Determination.

Michael received a MSc in Physics with Economics at Heidelberg University, Germany.
During his studies and worklife he spent a significant time abroad, e.g. in France, Belgium, the U.K., spanish-speaking countries and the U.S.
He began his career in 1996 as IT Project Manager with Procter & Gamble in Frankfurt, Germany, where he subsequently built up the Market Data Analysis Programme for a Business Category using Neural Network technology. In 1999, he joined Mercedes-Benz as CRM Marketing Manager in London, U.K., to lead their European Customer Data Analysis team and develop customer loyalty programmes. In 2001 he moved on to Siemens where he held senior management positions in Business Development and Corporate Account Management, with a focus on Public Infrastructure. In 2009, he joined the board of the Siemens Ultrasound Division in Mountain View, CA, as CMO, where his responsibilities included Corporate Marketing & Communications and Corporate Product Management.
In 2012 Michael joined the ROSEN Group in Lingen, Germany, to lead the Product Management at ROSEN’s R&D center. He built up the International Service Development team, which today drives Service improvements and the creation of innovative services with a strong focus on customer benefit, such as the ROMAT service for Pipe steel grade determination via ILI and the Ultra-high resolution MFL-A service that supports operators in significantly reducing dig cost.